Comments on: Audi S6 LED install for Volkswagen MkV R32

By: lupO

lupO — Thu, 15 Oct 2009 11:54:29 +0000

very nice job, it really suits the car.

By: Derek

Derek — Wed, 30 Sep 2009 02:22:29 +0000

I trimmed the original lower grills to accommodate the LEDs.

By: Tobias

Tobias — Tue, 29 Sep 2009 01:57:44 +0000

Great DIY.

I plan on doing the same.
Did you buy the open fog light grill or did you cut them?

By: Daytime running lights- your thoughts... - VW Forum :: Volkswagen Forum

Daytime running lights- your thoughts... - VW Forum :: Volkswagen Forum — Mon, 18 May 2009 16:23:04 +0000

[...] summer and would use my Jetta as a backup car. In was thinking of doing something similar to this Audi S6 LED install for Volkswagen MkV R32 – Derek Punsalan – 5ThirtyOne except I was going to buy some ecodes and take them apart and put them inside there. Also I was [...]

By: Kai

Kai — Tue, 05 May 2009 03:10:46 +0000

Hi there, great job, it works awesome. I am going to try this on my MKV. please email me where you get the parts you needed like LEDs, Connectors chris_shaok@hotmail.com, Thanks

By: mitch

mitch — Wed, 18 Feb 2009 18:32:16 +0000

Okay, now I need to find out which are the two that combine and which one is left by itself.

By: Derek

Derek — Wed, 18 Feb 2009 18:19:54 +0000

Then the two that combine into one are hot, the other is cold.

By: mitch

mitch — Wed, 18 Feb 2009 18:04:19 +0000

I believe two of them combine into one.

By: Derek

Derek — Wed, 18 Feb 2009 17:58:53 +0000

It doesn’t look like any of those three wires combine into one. I’d have to pull my lights back out to test in order to give you an accurate wire diagram.

By: mitch

mitch — Wed, 18 Feb 2009 17:39:13 +0000

Here’s the link to pics of the pigtail harness on the ecstuning site:
http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi/?html=learnmore-noresize.html&productID=10034